Monitor Outlet - Gamers Zone

This Dual-Pole Floor Stand has dual tubes for mounting a single flat panel display at its center of gravity. You can lock the display in a horizontal or vertical position depending on the mount chosen - please request the position that you prefer when ordering. It may be mounted anywhere along the vertical poles to achieve the perfect viewing height. The poles also serve as a conduit for cabling.

Note: The Dual Pole Floor Stand now ships standard in a new Dark Gray base color.

An optional flat accessory shelf (see accessories below) can be added above or below the display in a front or rear-facing mode. Multiple power and signal cable slots are available in each chrome post to run cables within the tubes. Constructed of heavy gauge steel the flat steel base plate is a wide 36 inch x 30 inch deep to insure the stability of the display mounted stand. Four 3/8 inch holes are available (one at each corner) of the base plate for additional security if needed to secure the base to the floor structure. Setup is easy with only a hex key (supplied) and a screwdriver.

Note: This Dual-Pole Floor Stand must be used with one of our tilt wall mount kits (see accessories below). The wall mount kit connects to the back of the display and then to the floor stand. Not all tilt wall mount kits are compatible with the floor stand. Floor stands and mounting kits are not returnable, so please call us at 888-478-6161 to be sure that you purchase the correct wall mount kit to work with the floor stand.