Description

Exceptionally smooth and quiet movement, this is a good projector ceiling mount choice for finished ceilings in homes and corporate offices.

Fits most installation requirements, needing only eleven inches of clearance above the ceiling; easily accommodates multiple control options
Plenum rated; not UL Listed.


Note: All mounts are NON RETURNABLE. Be certain to call us at 888-478-6161 to verify this mount will work with your projector.


Features:
Plenum rated
Low profile - 11 inch overall height
8 1/4 inch of travel distance
Low voltage controlled
Also suitable for push-up table top installation
Projector Roll, Pitch and Yaw
Fore/aft, left/right projector positioning
Vertical projector cradle adjustment
Quick projector disconnect/reconnect
Three mounting methods
Two internal outlets, one is switched on 110V units
Used with finished or suspended ceiling
Horizontal and vertical cradle positioning
All electrical components are CSA and VDE listed



Specifications:
Downward Travel: 8 1/4inch (209.55mm)
Minimum Clearance Above Ceiling: 11"inch
Overall Dimension (Up Position - H x W x D): 11 inch x 22 1.8 inch x 26 1.8 inch (279.4mm x 562mm x 664mm)
Maximum Projector Size (HxWxL): 9.5 x 18 x 22.25 inches
Ceiling Opening (WxD): 22 inch x 25 3.4 inch (+3/8 inch, -0 inch)(558.8mm x 654.1mm)
Ceiling Closure Panel (WxD): 19 5.8 inch x 23 3/8 inch (498.6mm x 593.8mm)
Voltage: 120V or 230V
Low Voltage: Will accept 5 - 30V AC/DC for triggering commands
Current Draw: 0.9 Amps continuous
Net Weight: 66 lbs. 29.7 kg
Lift Capacity: 35 lbs.
Projector Adjustment Features: Roll ± 2 degrees /Pitch ± 12 degrees /Yaw ± 5 degrees
Horizontal and vertical cradle positioning